I have been thinking of doing a spray bar in my smaller tank and here is how I was thinking of doing it. Tell me if yall think its a good idea or if you have a better way of doing it lets hear it. I was going to take the out hose coming out of the filter and take off the nozzle on it and mate a piece of pvc with small holes drilled in it to the hose. I would mount it horizontally probably with suction cups to the back side of the tank just above the water line. My concerns are mainly with the contruction of the pvc "bar". The pvc has to be capped on one end and I am concerned the pvc cleaner and glue may be toxic to my fish. If yall have any other ideas I would love to hear them
TS
TS
