Hello everyone, this is my first post. Been observing everyone here past couple weeks and I have decided to post finally. I'm going to be building a stand for my 90 gallon. Trying to make it also fit a 55 gal. Sump on the bottom as well. Seems to me there's a lot of knowledgable folks here so any constructive criticism appreciated.
First off dimensions: 90g is 48.5x18.5x24 in. (LxWxH) respectively.
55g is 48.25x13.25x19 in.
Wanting stand to be 50x20 and 30in tall. So I'm thinking build framework for footprint of my 90 first then add legs. I know 2x4s are about 1.5-ish by 3.5-ish. So that leaves me with about a 14in wide opening on the side to slide my 55 in. Kinda hard to explain without pics but posting from iPad and I can't upload files. Help on uploading appreciated as well.
First off dimensions: 90g is 48.5x18.5x24 in. (LxWxH) respectively.
55g is 48.25x13.25x19 in.
Wanting stand to be 50x20 and 30in tall. So I'm thinking build framework for footprint of my 90 first then add legs. I know 2x4s are about 1.5-ish by 3.5-ish. So that leaves me with about a 14in wide opening on the side to slide my 55 in. Kinda hard to explain without pics but posting from iPad and I can't upload files. Help on uploading appreciated as well.
