Currently working on a stand for a 40b. Question is will this 1/2in plywood support a 1ish inch overhang?
I intend on placing this tank below my 55 and eventually 75 with the goal of the front glass being flush with the tank above.
I have included pictures of the setup I have on my 30 so you can get the picture I am trying to paint. The metal stand does a nice job of hiding my sloppy diy work this way. I do have the option of doubling up but then I lose some of the discreteness. Why the 2in gap in the middle you ask? My scrap board was only 34in at the widest.
I intend on placing this tank below my 55 and eventually 75 with the goal of the front glass being flush with the tank above.
I have included pictures of the setup I have on my 30 so you can get the picture I am trying to paint. The metal stand does a nice job of hiding my sloppy diy work this way. I do have the option of doubling up but then I lose some of the discreteness. Why the 2in gap in the middle you ask? My scrap board was only 34in at the widest.