Thank you very much to everyone who helped me out on my "Bulkhead + Chipped Glass" thread from a couple weeks ago. My 110 is ready to go.
I filled in the chip around the hole with some epoxy, scraped it with a razor after it set and put my bulkheads in the normal way. The only other thing I had to do was a cut a very, very minor crescent shape out of the bottom trim up against the glass in order for the nut to tighten all the way. Filled and let sit overnight, bone dry not even a drip.



I filled in the chip around the hole with some epoxy, scraped it with a razor after it set and put my bulkheads in the normal way. The only other thing I had to do was a cut a very, very minor crescent shape out of the bottom trim up against the glass in order for the nut to tighten all the way. Filled and let sit overnight, bone dry not even a drip.


