TDS creep & automation on rodi

PYRU

Probation Member
Probation Member
Apr 8, 2015
2,358
3,284
164
SE
I was hoping to automize an auto top off system, but I can't find away around tds creep that happens when your rodi kicks on.

I don't want to replace di like crazy. So is there a way around this beside a manual inline wye to divert? I've looked for a timed diverter type valve but can't find anything for it.
 

epond83

Plecostomus
MFK Member
Nov 10, 2009
801
53
61
Duvall, WA
I think you are looking for an automatic flush valve:
 

PYRU

Probation Member
Probation Member
Apr 8, 2015
2,358
3,284
164
SE
The way around any substance buildup from ongoing evaporation and replenishment is water changes.
Is this a tourettes outburst? The vid below goes over what I'm talking about.
 

PYRU

Probation Member
Probation Member
Apr 8, 2015
2,358
3,284
164
SE
I think you are looking for an automatic flush valve:
I have one of those. That's used to flush your system when using a second membrane that reduces waste water production.

You usually have a manual valve before your resin that you bleed off the high tds. I want to use Auto shutoff all the time, but if I do it like that then when the system clicks on you get an until high tds that will chew through your resin like crazy.

There has to be a diverter valve I can put on a timer or sensor. I just can't find a remedy
 

local hero

Plecostomus
MFK Member
Sep 11, 2006
76
94
51
...in my head
I've never used it but there is this-

 
zoomed.com
hikariusa.com
aqaimports.com
Store