Tell me what to draw

[AquariumNerd]

Hi. I am sad, supposedly. I design tanks, mainly large concrete ones on skechup. Please tell me what you would like me to design for fun. I need ideas.

Here is the latest tank.




http://sketchup.google.com/3dwarehouse/details?mid=df03945914878de8932df6e968b75c06&prevstart=0

 

[benito1188]

cool. umm. detailed sump?

 

[Iffrat]

i am thinking about building a 72" x 30"x 30" plywood build with front and side viewing windows .. and i dont know what kind of stand .. wanna draw that up for me

 

[AquariumNerd]

OK I will draw a sump and tank. For the tank I need to know the width of the ply, and the number of veneers, the layers in the ply. What are you using to join it.

 

[Iffrat]

OK I will draw a sump and tank. For the tank I need to know the width of the ply, and the number of veneers, the layers in the ply. What are you using to join it.

http://www.monsterfishkeepers.com/forums/showthread.php?t=236174

is the method i am going to use .. with the same rubber coat and going to use 3/4 ply (7 ply i think) been a while since i used 3/4" and 1/2" glass

 

[AquariumNerd]

http://www.monsterfishkeepers.com/forums/showthread.php?t=236174

is the method i am going to use .. with the same rubber coat and going to use 3/4 ply (7 ply i think) been a while since i used 3/4" and 1/2" glass

ok. 3/4'' is 18mm and a multiple of this is nine. i will show it as nine ply, as this will make it easier to draw.

 

[The1and only]

Dude did you buy the upgraded sketch up because none of my stuff looks that good.

 

[GetITCdot]

if you could do a mock up of a tank for me that would be awesome. 60"x30"x30" using 1" plywood and 1/2 saphire glass

 

[AquariumNerd]

Dude did you buy the upgraded sketch up because none of my stuff looks that good.

No I didnt. I am more for freeware.

 

[AquariumNerd]

No I didn’t. I am more for freeware. Add width to the pieces of wood and detail. Sometimes you get multiple faces which give a strange appearance. If you make every sheet of glass 3d and draw ply wood with every layer and add the correct colours you will get some good drawings.