Testing an acrylic aquarium

[BizTodd]

I have a 180 Gallon Acrylic tank that I bought used. I want to test it to see if it holds water, but the bottom is drilled. I don't want to test it on the stand, because it was built in place in my room.

The question I have is how best to support the tank with the bulkheads extending out the bottom? I could flip the bulkhead over, but it still leaves an uneven spot.

Thanks in advance,

Todd

 

[Jacob92677]

Use some 2x4 on a flat surface preferably outside
I’ve seen lot of guys test fill acrylic like this