1. using 2- 55g plastic drums stacked on top of eachother. bottom one stacked with some bio filtration media and sump pump at bottom and hosing going all the3 way to the top
this would be a goldfish or guppy breeder or maybe even convicts lol.
2.converting a hang on filter to drain water into a sump tank below my 150g or just leave it is this too much work for little acheivment?
btw i have 3 pumps sitting in my garage from my uncle he does maitenence at the local newspaper and he has alot sitting around
this would be a goldfish or guppy breeder or maybe even convicts lol.
2.converting a hang on filter to drain water into a sump tank below my 150g or just leave it is this too much work for little acheivment?
btw i have 3 pumps sitting in my garage from my uncle he does maitenence at the local newspaper and he has alot sitting around
I think I understand what you mean with the two barrels in #1. Stack them with the filter and pump in the lower one and holes drilled in the upper barrels bottom to act as a drip tray into the filter media in the lower barrel. It is a good idea if it were say eleven gallon buckets...at some point you will need to clean the filters. 55g of leaking barrel is not going to move very easy, and the fish won't like being in a dry barrel. Also, a power outage will be a death sentance for your fish.