Has anyone ever hooked 2 pumps to a single pvc pipe? I have two QuietOne 2200's Each has a 1.5' PVC pipe gong up. Then the on one the left goes right about 1.5' and Connects to a Tee on the opposite side of that tee is the connection from the Pump on the right. So basically the out put of each pump is flowing in the same direction colliding with each other before leaving the Tee.
I know its some what a of a problem because I can't turn off one pump and turn it again. I have to turn them both off and turn them both on at the same time.
Just looking at the out going flow it seems pretty low, those two pumps at maybe 2' head should easy put out a combined output of 800GPH
I will post a real pic when I get home if its needed to better understand.
I know its some what a of a problem because I can't turn off one pump and turn it again. I have to turn them both off and turn them both on at the same time.
Just looking at the out going flow it seems pretty low, those two pumps at maybe 2' head should easy put out a combined output of 800GPH
I will post a real pic when I get home if its needed to better understand.
