UV and wet/dry

[chico3611]

My water is going through a wet/dry with 3 return lines. One line will split go to a UV filter while the other two return lines go to the tank. I was planning on the third line with the UV going to the tank but I have seen set ups where the UV line feeds back into the wet/dry is there a reason for that? (I ask b/c my UV came with out instructions < and all over the F-in' thing it says "read the insturctions first" in like 5 languages) :WTF:

And that is the question, should my UV water go up to the tank or dump into the wet dry?

 

[johnptc]

it will work either way

My water is going through a wet/dry with 3 return lines. One line will split go to a UV filter while the other two return lines go to the tank. I was planning on the third line with the UV going to the tank but I have seen set ups where the UV line feeds back into the wet/dry is there a reason for that? (I ask b/c my UV came with out instructions < and all over the F-in' thing it says "read the insturctions first" in like 5 languages) :WTF:

And that is the question, should my UV water go up to the tank or dump into the wet dry?

 

[chico3611]

Is there any specific reason for feeding it back into the wet/dry?
or does it have any benefit?

 

[Dr Joe]

No, since it just came from the filter theoretically it's clean water...nothing to re-filter (anything the UV killed was already small enough to pass thru the filter so it wouldn't catch it a second time around).

Run it to the tank. Check the flow rate for proper dwell time too.

Dr Joe

.

 

[chico3611]

I could'nt see any benefit either but since I had seen a few set ups that way I just wanted to make sure there wasnt something I was unaware of.

Thanks to both.