Anyone have any experience with these pumps http://www.wlimproducts.com/wave2.htm I was originally considering a ReeFlo hammerhead but these pumps seem to be more efficient. Thoughts? I’m considering the wave 2 1/4hp as I have about 15ft total head.
W lim Corp pumps?
- Thread starter yzf450motoxrider
- Start date
Its double the cost about the same watts, and is 9.24' the max head? Seems a hammerhead would be a much better choice. Ive run alot of reefflo products and they all are super quality products.
It’s about 620 hammerhead is 460. Max head on the pump I was looking at is around 25ft. You have to compare the two pump curves
W lim 4200gph @15’
Reeflo 4000gph @ 15’
When you get down to10’ head the w lim really starts to pull away. Plus the w lim uses 2 inch inlet and outlet. To me the only advantage of the reeflo is the cost about 150 cheaper.
Reeflo 4000gph @ 15’
When you get down to10’ head the w lim really starts to pull away. Plus the w lim uses 2 inch inlet and outlet. To me the only advantage of the reeflo is the cost about 150 cheaper.