im not sure if i got this in the right section so mods if not could you please put it where it belongs thanks. ok my ? is what is the best way to run my return line frome my sump. i have a 125g tank with two corner overflows. im using the overflows as my pickups of course an droping into the wet/dry. an should i use a spray bar to return my water to the tank or put just a open line in the tank to help cause some current. i have a mag drive 7 for my sump pump. an thanks for any help
wet/dry return
- Thread starter csa dad
- Start date
I hate to say this, but you can really do w/e you want with a overflow/sump set up. The spray bar or just a return jet...whatever your preferance is. The only suggestion I can offer is is dont make the return line too deep without makeing a hole below the surface that will break the siphon if your power goes out or your asking for a mess.
i use mag-drives on all my tanks,i would just run them open to make current(i agree about the hole to break siphon)
i thought it would be a better idea to run a spray bar but my dad said to put it in the tank an make it like a power jet head
I think the spray bar will be a cleaner, more finished look. It wont give you much current, though...