I've posted a picture of my glass panel placement for my wet/dry filter setup. Can anyone see any potential problems with this? Or is it good? The tank i'm using is a 50 gallon tank.
wet/dry tank setup.....
- Thread starter thepresence
- Start date
What method are you using for mechanical filtration? The design that you have with the first chamber implies that you would be using some sort of a filter bag.
I would say to increase both the left and right side and give yourself a bit more room. You will still have plenty of room for biomedia.
I would say to increase both the left and right side and give yourself a bit more room. You will still have plenty of room for biomedia.
I will be using filter socks in the first chamber. Would you say maybe 8" on each side instead of 6"?
6" would be OK on the filter sock side, but probably 8" on the pump side. You have to consider the size of most pumps unless you have sized it with your pump already. Even 8" may turn out to be a tight squeeze for your pump to function properly in a nice pool of water.