Yet another DIY wet/dry sump

  • We are currently upgrading MFK. thanks! -neo

wjones1970

Feeder Fish
MFK Member
Mar 21, 2008
94
0
0
KY
Please let me know what you think.


The top two drawers will have filter floss and the bottom two will have some bio-balls and lots of pot scrubbies.

13.JPG

8.JPG

9.JPG

10.JPG

11.JPG

12.JPG

14.JPG

15.JPG

16.JPG

17.JPG
 
How will you know what's in the drawers if you don't have labels on them :nilly:.


Congrats.... and watch for leaks (water follows the bottom of the drawer and drips off of the corners. I concaved the bottoms of the drawers so water always flowed to the center. Draws rubbed when you pulled them out but that was livable) You may consider putting a shallow tray under them.

Dr Joe

.
 
Dr Joe;2021006; said:
How will you know what's in the drawers if you don't have labels on them :nilly:.


Congrats.... and watch for leaks (water follows the bottom of the drawer and drips off of the corners. I concaved the bottoms of the drawers so water always flowed to the center. Draws rubbed when you pulled them out but that was livable) You may consider putting a shallow tray under them.

Dr Joe

.

How did you concave the drawer bottoms?
 
keep a close eye on the 2 sumps as they will bow very quickly and leak from the bulkheads. I tried something like this years ago but the plastic sumps are not thick enough to hold water constantly. a better idea is to use 2 glass tanks of the same size. even better are plexi tanks easier to drill holes.
 
wjones1970;2022861; said:
How did you concave the drawer bottoms?

Ok, you asked....

Place a bowling ball in the drawer and use a heat gun to warm the plastic till it starts to sag a little. :D

You asked.

Dr Joe

.
 
Dr Joe;2023060; said:
Ok, you asked....

Place a bowling ball in the drawer and use a heat gun to warm the plastic till it starts to sag a little. :D

You asked.

Dr Joe

.

bowling ball? who has a bowling ball?:ROFL:
 
MonsterFishKeepers.com