Yes, Justin it's been a long time.... You'll love this inexpensive device. The adjustments are crazy! Love what you're doing on the 600 project. These LED's are everywhere on amazon and ebay like a virus, lol. I'd go with these: SMD 5050 RGB LED strip. Cost for the entire kit delivered is under $30 for 32' or under $20 for the 16'. If you decide to cut the strips to cleanly mount (turns on each end). Recommend the harness kits to avoid some DIY soldering/wiring. Good luck!
Yes it has. I hope you are doing well. If I ever get into the poly side of things you are the first I'll call! I'll take a look. The harness is a great call. Thanks for the kudos on the build. I'm having fun.
It'll look good on anything, lol. Red Green Blue +/- adjustment on DIY mode is the best feature imo. It allows you to fine tune the white led color hues to your liking. U know to enhance the aro and sting rays in your 600g.
I was gonna ask...
The strips are 180 degrees looped on each turn. I use the plastic egg crates to secure each ends w/zip ties. So, my 6 foot tank and 16' x 2 of LED. Resulting of 1 turn for each side.
Yes. That was her contribution to this build and to make sure each end is evenly balanced.
this was part of the tutorial I was looking for. Heh that's funny with your daughter balancing the light on her head. That's pretty good!Simple project to start. Mount it on anything solid that's around the house. Supplies I had from other projects - Plastic ceiling egg crate, zip ties, and purchased the 32' led kit. If u decide to use the egg crate. A 6 footer will hold together nicely, and lightweight enough for a small person to manage
View attachment 1239437 View attachment 1239442 View attachment 1239436 View attachment 1239438 View attachment 1239435
