New Fish Room - 11.5 X 6.5
- Thread starter cantrell00
- Start date
I would get familiar with Google SketchUp. It helped A TON in laying out my room.
Got some work done on the overhead reservoir... Assembly sequence & distribution tank.
The spout I designed for adding chemicals, etc won't work though. The spout to add what is needed is too close to the ceiling. I am thinking of putting a female hose attachment end onto a PVC drop so I can just connect the fill hose there. Need to figure out a way to add the dechlorinator & other chems inline with the fill hose. May require some type of DIY fill attachment.
The spout I designed for adding chemicals, etc won't work though. The spout to add what is needed is too close to the ceiling. I am thinking of putting a female hose attachment end onto a PVC drop so I can just connect the fill hose there. Need to figure out a way to add the dechlorinator & other chems inline with the fill hose. May require some type of DIY fill attachment.
could you cut out the insulation that's in your way? i'm just assuming the place you want to put your chemicals in close to the top.
That is a possibility. I think I am actually going to build a assembly that I connect to the reservoir & the hose. Basically, adding all of the chems, salts, etc to the fill line itself & letting the water flow deliver it to the reservoir.
Not ideal or what I had in mind but effective nonetheless...
an inline canister filter might work if you had a ball valve on each side to be sure it was off when you opened it
