Hi
So i am setting up a 8x4wide by 2tall tank with a 7x3wide by 18" tall sump. In one end i plan o a wet/dry trickle and somewhere in the sump i want to add K1 media. Where is best to add the media and do you need to put airstones under it to keep it moving? If so how do you keep it in just one of the chambers?
Also how do i know what size pumps to use? I am going for two 9000ltr pumps on a 1600 ltr tank to give me a little over ten times a hour turn over as it will be for rays. But how can i be sure the set up will be ok and the pumps dont empty the sump quicker than the tank drains into it? I am going for two weirs in the main tank with durso stand pipes. I have done all this before on a 6x2x2 and all worked fine but for some reason i am getting paranoid on the idea of doing it on a larger scale and don't want to screw it up! Any help would be appriciated. Especially on the K1 media as i have not used this before.
Thanks
So i am setting up a 8x4wide by 2tall tank with a 7x3wide by 18" tall sump. In one end i plan o a wet/dry trickle and somewhere in the sump i want to add K1 media. Where is best to add the media and do you need to put airstones under it to keep it moving? If so how do you keep it in just one of the chambers?
Also how do i know what size pumps to use? I am going for two 9000ltr pumps on a 1600 ltr tank to give me a little over ten times a hour turn over as it will be for rays. But how can i be sure the set up will be ok and the pumps dont empty the sump quicker than the tank drains into it? I am going for two weirs in the main tank with durso stand pipes. I have done all this before on a 6x2x2 and all worked fine but for some reason i am getting paranoid on the idea of doing it on a larger scale and don't want to screw it up! Any help would be appriciated. Especially on the K1 media as i have not used this before.
Thanks