Im making a sump filter for my 450 gallon and the sump will be 180 gallons. Im situating a 20 gallon trash bin inside the 180 gallon sump Wich will sit on the far right side of the sump against the side panel to act as the media holder. So this whole "trash can filter" is going to sit inside the 180 gal "sump" as the filtration. I have cut the bottom out of another trash can to sit inside the top 5 inches of the Main trash bin this will act as the trickle tray I have drilled many holes so that water can drip down into the media , the trickle tray sits inside the main trash can and water overflows from the main tank through the top of the trash bin into the tray which will hold blue and white filter pads ((and maybe seachem purigen or something not sure yet)). From there water trickels down from the trickle tray down into the main trash bin which holds the media, I am going to use lava rocks to fill the trash can this will be my media. Half will be above water the other half will be below. I've heard it's basically the same as seachem matrix. What do you guys think? Good idea? Or no? Any tips or experiences will be appreciated.
I'm basing my filtration similiar to this just instead of doing it with the rubber maid I will use a 180 gallon tank. And due to height of the stand I will be using a slightly shorter brute trash bin
http://youtu.be/AM0LXcsN6bA
Sent from my SAMSUNG-SM-G870A using MonsterAquariaNetwork App
I'm basing my filtration similiar to this just instead of doing it with the rubber maid I will use a 180 gallon tank. And due to height of the stand I will be using a slightly shorter brute trash bin
http://youtu.be/AM0LXcsN6bA
Sent from my SAMSUNG-SM-G870A using MonsterAquariaNetwork App
