Yes, I have personally seen one. Touched it, added and glued the pectoral and pelvic fis too, because unlike the rest of the arowana and its dorsal, caudal, and anal fins that are all cast together on the fiberglass reproductions . They are all cast as one piece. The other two sets of fins(pelvic & pectoral) have to be added later, before it's painted. They are longer, thinner and more fragile and prone to breakage. I have personally experienced trying to mount a real arowana also, twice. They are extremely difficult to skin without loosening any of the scales. IF you can get the meat and bones out of the fish through the longitudinal incision that goes the entire length of the arowana's body from the gill to the base of the caudal fin, then that's about 1/4 of the work done. Next take out the eyeball on both sides and remove the cheek meat. Then scrape the fishes carcass of any leftover meat or tissues. Then degrease the fish in a bucket with a special chemical. After that dry it thoroughly, stuff the insides with your putty that's made for taxidermy and don't forget about the cheeks. Fix your fake eyes in the correct position. Using pins, fix it's fins and body to a board in the final position you desire the fish to look like when finished. Wait for it to dry. Then mix up your colors so you can airbrush them on(normally arowana colors aren't available, Lol). Paint your fish. Then clearcoat it over the paint, and ta-da, your done. 99% of mounted arowana are fiberglass reproductions. All one size and shape for the most part. The real fish are extremely difficult to mount. I'm good at other fish, but these fish make me look like I am an amateur. The colors on ALL mounted fish are painted on them. I can make a snow, a xanthic, or a pink arowana with purple tiger striped fins that has flames or racing stripes on it if I want it that color. So, yes I've seen one or two. P.S. IT is not as simple as I made it sound. Thanks


