75 going on 180
- Thread starter twentyleagues
- Start date
Alright so here's the start of the drip water change system. I wanted it to be heated drip so I got a thermostatic mixing valve. It needed to be filtered so 3 stage 1st sediment, 2nd granular carbon, 3rd carbon block. Lots of cpvc and fittings. Still need to install the drain pipe and overflow drain. I also need a drip emitter I guess. I was going to use sprinkler valve but it allows to much water into sump I think some is going to go down the drain before it goes up to the tank. I'll use the valve on the drain though.
Pipe from basement to fill tank after a w/c.
Tank during refill.
And the other pic is of the valves right now one goes to a short length of hose to fill sump the other goes up to the tank.
View attachment 20171023_001516.jpg
So did some filtration upgrades. I didn't do it exactly how I was going to but I think it will be good. Installed filter socks.
Making it rain!
It took some ballz to do this.
Making it rain!
It took some ballz to do this.
Yeah I had them on my salt system don't know why I didn't use them here.
Looks great! Idk how you guys come up with these designs and can build these things . Could you post a pic of the entire thing?
how did you get the branches to hang in the upper area of the tank? Are they in the background?
I made places to put "things" prior to finishing the background.
