Tank Upgrade 450-550g Planning

  • We are currently upgrading MFK. thanks! -neo
nzafi said:
JK47 JK47 the painted bottom does look really good in those pics. Much nice than mine did. I guess a combination of the material and type of paint that was used.
Click to expand...

I'll get you a pic of the exact paint I use when I get home tonight. I'm using it for the bottom of the current project as well. Did you use oil based? Latex is a must IMO
 
Below are the two options I am looking at. It is not 100% at scale but close enough. You will see the overflow boxes will definitely take up more space as they will be 18in x 6in x 28in (tall).

JK47 JK47 curious on your thoughts as it relates to the position of returns/intakes. Goal is to make sure I get as much of all waste/dirt to minimize cleaning. I will say I am looking into eductors and their impact on reeflo pumps.

Option 1 w/hmf
upload_2018-3-7_12-10-27.png

Option 2 w/overflows containing K1

upload_2018-3-7_12-9-33.png
 
N nzafi , painting the wood underneath wont do anything... itell look black when dry...and back to mirror/un colored when full. ive painted hanously scratched tanks that look like fresh black material from the inside. painting the back or underside really gives it a nice sheen look from the inside even using matte paint like Justin is saying... i usually prefer black oil based paint but have used it all by now. just need a good 2-4 coats to really block all light coming through and give u a nice shell for when its time to get it on the stand in case u scratch it. oil based paint slides a bit easier also to get on a stand lol.. can be a pain prying tanks back off the stand so make sure it has a good week to dry solid.
 
  • Like
Reactions: mrrobxc
nzafi said:
Below are the two options I am looking at. It is not 100% at scale but close enough. You will see the overflow boxes will definitely take up more space as they will be 18in x 6in x 28in (tall).

JK47 JK47 curious on your thoughts as it relates to the position of returns/intakes. Goal is to make sure I get as much of all waste/dirt to minimize cleaning. I will say I am looking into eductors and their impact on reeflo pumps.

Option 1 w/hmf
View attachment 1303407

Option 2 w/overflows containing K1

View attachment 1303406
Click to expand...

Could option 3 be external overflows similar to how a coast to coast would be set up? If you are having the tank built it could be possible and would give you the full floor footprint back.

If not I would vote for the corner overflows. I like as much open room in the middle as possible.
 
JK47 said:
Could option 3 be external overflows similar to how a coast to coast would be set up? If you are having the tank built it could be possible and would give you the full floor footprint back.

If not I would vote for the corner overflows. I like as much open room in the middle as possible.
Click to expand...

External is not an option. The tank has to go up against the wall otherwise I cannot do a 48in wide tank. If I do 6in overflows I then need to do a 42in wide tank. Seeing I am having the tank built I can probably get the boxes installed in the corners. I am waiting to see how you do the K1 in your build to make a final decision.

Have you ever done drains in the middle of the tank like I am doing? I can move them to the back but once again they need to go through the bottom. They will either be low profile or I will raise them 6in so I can do sand.
 
  • Like
Reactions: mrrobxc
nzafi said:
External is not an option. The tank has to go up against the wall otherwise I cannot do a 48in wide tank. If I do 6in overflows I then need to do a 42in wide tank. Seeing I am having the tank built I can probably get the boxes installed in the corners. I am waiting to see how you do the K1 in your build to make a final decision.

Have you ever done drains in the middle of the tank like I am doing? I can move them to the back but once again they need to go through the bottom. They will either be low profile or I will raise them 6in so I can do sand.
Click to expand...
yep. My 300 is setup that way. I usually close off bottom drains with a bulkhead. Not sure why I don't use them, it's a solid design, just not something I really incorporate into my style of build.
 
Well I am happy to say that today I put down a deposit with fishtanksdirect for a custom 535g (8x4x30in) tank. I will be having a call next week with their tank builder to iron out the specific details. I have decided to go with a fully clear tank and I will be painting the back and bottom myself. I wanted to originally go with Midwest but found a lot of positive feedback on FTD and the price differential was too much considering they were both using 3/4in acrylic for all panels.
 
  • Like
Reactions: wednesday13, mrrobxc and JK47
nzafi said:
Well I am happy to say that today I put down a deposit with fishtanksdirect for a custom 535g (8x4x30in) tank. I will be having a call next week with their tank builder to iron out the specific details. I have decided to go with a fully clear tank and I will be painting the back and bottom myself. I wanted to originally go with Midwest but found a lot of positive feedback on FTD and the price differential was too much considering they were both using 3/4in acrylic for all panels.
Click to expand...

Congrats man!!! I’m jealous! You must be pretty pumped about it
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom