So I have a 150 gallon sump. When I originally made it installed baffles into it and I now after years absolutely hate the baffles. So I wanna remove them. Where my two inlets come in they come into filter socks and polyfiler.. then flows over into the chamber with my foam then into lava rock then into ceramic then into return pump. For some reason I have to have my return pump on the lowest setting or it pumps too fast which makes my flow into the tank terrible and idk why that is. Maybe bc it's 1.5 inch pipe I have pipped to the tank and it's too large. But I wanna eliminate baffles to have an open sump and maybe it will also help the flow but looking to redo my sump.
I plan on getting poret foam again and making that the divider between my sump and the return pump... What would y'all suggest too do for the two pipes coming into the sump. Just keep it filter socks and foam? And just keep that first baffle?
I also was thinking of running plants and shrimp but my concern is how do you clean the bottom of the sunp out when it gets all dirty without killing or sucking up all the shrimp?
You can see in the photo I have pipes run along the front of the tank and the back and that's the pipes that flow into the sump.


I plan on getting poret foam again and making that the divider between my sump and the return pump... What would y'all suggest too do for the two pipes coming into the sump. Just keep it filter socks and foam? And just keep that first baffle?
I also was thinking of running plants and shrimp but my concern is how do you clean the bottom of the sunp out when it gets all dirty without killing or sucking up all the shrimp?
You can see in the photo I have pipes run along the front of the tank and the back and that's the pipes that flow into the sump.

















