I like it... Looks like you used nice thick plexi for the baffles. Do you have a prefilter for the K1? That unlevel floor would've made me put the tank in a completely different area in the house, but looks like you did a good job evening it out. Cheers!
The plan is to convert this, to a brackish tank over time. We purchased a puffer that has to be in at least brackish. My Family loves the white tipped Colombian shark cats and they are another big fish that needs brackish water as an adult, And we would like to have 5 to 10 of them. But as luck would have it. I got hold of an old glass 180 gallon 74x24x24 for pennies. I think that might be a better choice for the brackish monsters. I am also concerned the k1 wont work in high salinity. I might have lots of bubbles.
I like it... Looks like you used nice thick plexi for the baffles. Do you have a prefilter for the K1? That unlevel floor would've made me put the tank in a completely different area in the house, but looks like you did a good job evening it out. Cheers!
With the next set of baffles I am going to try 45 degree slanted slices instead of circles. The holes took a long time and media will sometimes get stuck slightly, until the flow pushes them past.
I am using sponge pre-filterers on the overflows . They are noising and with bigger fish this is where I might have big problems as well. the fish could crack the exposed bulk heads.
I did not realize the floor was as sloped until I put a level on the stand, when i was test fitting. The floor slants only against the wall. That was one of my last walls for big tanks up stairs.
