200 gal filter in a 180 gal tank

  • We are currently upgrading MFK. thanks! -neo

DanDanUK

Feeder Fish
MFK Member
Jun 2, 2005
2,806
6
0
44
Leeds , England
I'm asuming that a filter made for a 200gal tank would be okay in a 180gal tank can anyone confirm this for me please.



:feedback:


P45 ? or Trust ? i know you guys really know what your on about NO DISRESPECT TO ANYONE ELSE you may know more or less than these guy's but in here these guys answer all the questions. And normally answer them correctly.
 
no its too small

j/p
it should be fone
what filter are you looking at?
 
just my opinion - but I generally go for WAY over filtering. I.E. - if the filter is "rated" for a 100 gals I'll use it on a fifty gallon.

But then again I tend to keep too many fish in tanks so I have to go for excessive filtration
 
should work but remember you atleast want duble the filtration for what ever size tank.
 
I'm not p45 or trust but have kept a lot of tanks successfully so IMO yes, barely, esp. if you add a power head to bump up the water movement and O2. On a 150g I like 2 filters rated at 150 plus about 1/2 the bottom using an undergravel filter with powerheads. I don't think you can overfilter a tank but I KNOW you can underfilter one.
 
alway over filter...
never under
 
can't overfilter a tank, and manufacturer's "recommendations" (ie "this filter is rated for 200g tanks") are mere guidelines for the n00b crowd.

A better way to guage filtration is via water turnover per hour. You start with the tank's capacity- say, 100g, and then go from there. Most everyone aims for at LEAST 3-4x tank capacity turnover per hour (300-400 gallons per hour, assuming a 100g). Some people aim for 10x turnover... but 3x or more turnover will do the job. Actually, 1x or 2x might work for more lightly-stocked tanks, but I've never ran into anyone who's mentioned having filtration that low...
 
piranha45 said:
can't overfilter a tank, and manufacturer's "recommendations" (ie "this filter is rated for 200g tanks") are mere guidelines for the n00b crowd.

A better way to guage filtration is via water turnover per hour. You start with the tank's capacity- say, 100g, and then go from there. Most everyone aims for at LEAST 3-4x tank capacity turnover per hour (300-400 gallons per hour, assuming a 100g). Some people aim for 10x turnover... but 3x or more turnover will do the job. Actually, 1x or 2x might work for more lightly-stocked tanks, but I've never ran into anyone who's mentioned having filtration that low...

See this is why i just love this guy he tell's it how it is in a way most people would never see PURE GENIOUS !!!

Thanks for all your replys everyone much appreciated.
 
guppy said:
I'm not p45 or trust but have kept a lot of tanks successfully so IMO yes, barely, esp. if you add a power head to bump up the water movement and O2. On a 150g I like 2 filters rated at 150 plus about 1/2 the bottom using an undergravel filter with powerheads. I don't think you can overfilter a tank but I KNOW you can underfilter one.
There was no disrespect there fella it's just the other main queeries ive had they have seemed to answer them almost instantly sorry GUPPY my man i know you do hold some experience under your belt .
 
DanDanThePiranhaMan said:
There was no disrespect there fella it's just the other main queeries ive had they have seemed to answer them almost instantly sorry GUPPY my man i know you do hold some experience under your belt .
Dan, I was teasing, relax.
 
MonsterFishKeepers.com