230gal tank out of level

[Backfromthedead]

Shimmy shim shim!

I would drain the tank most of the way, move the tank off the wall a bit, and work in some strips of 1/4" plywood under the stand. Maybe use some wedges and a prybar to get it off the ground and set it if you need to.

 

[Lepisosteus]

Drain the tank 3/4 way down and add some shims. Use the plastic ones as opposed to the wood ones. They won’t break when you drive them in with a hammer. A 6x3x3 tank is 400 gallons by the way )

 

[DN328]

Drain the tank 3/4 way down and add some shims. Use the plastic ones as opposed to the wood ones. They won’t break when you drive them in with a hammer. A 6x3x3 tank is 400 gallons by the way )

I don't think it should change any of the good suggestions on here, other than the weight. I was reading through to see if anyone had caught the tank volume