heres an update! finally done. installed my uv and moved the black diamond rays over to this tank! christmas update!
http://www.youtube.com/watch?v=69A454VflLg
http://www.youtube.com/watch?v=69A454VflLg
315 Gallon Setup - TITAN AQUATIC!!!
- Thread starter m_class2g
- Start date
it looks so good i am rethinking my 125. it really is well done. nice tank mike. i hope it was worth the trouble you had with "t" to have something so beautiful now.
dave
yup well worth the trouble for sure! i normally hate waiting but in the end, at least it turned out good lol.
so here i am lifting the heavy lid back and forth, fixing things inside, putting fish in etc etc. so why not DIY a lid stand. i used 1.5 inch pvc cut to size with some cut outs and heres the final product. makes it a lot easier instead of having to slide the lid or lift it completely off the tank which would make my floor all wet.
i also moved a few things around inside of the sump. i initially had jap mat in the end compartment where the pumps are but the small fragments of the blue material kept getting sucked by the pump and i would have to keep netting it out in the main tank. i shifted the jap mat after the first compartment and put in regular sponge in the last. uv is running from the pump compartment, with a rio 2500.
ive had a few pms about my sump so here are some better pics for those that asked. enjoy.
so here i am lifting the heavy lid back and forth, fixing things inside, putting fish in etc etc. so why not DIY a lid stand. i used 1.5 inch pvc cut to size with some cut outs and heres the final product. makes it a lot easier instead of having to slide the lid or lift it completely off the tank which would make my floor all wet.
i also moved a few things around inside of the sump. i initially had jap mat in the end compartment where the pumps are but the small fragments of the blue material kept getting sucked by the pump and i would have to keep netting it out in the main tank. i shifted the jap mat after the first compartment and put in regular sponge in the last. uv is running from the pump compartment, with a rio 2500.
ive had a few pms about my sump so here are some better pics for those that asked. enjoy.
Very Very NICE!
[YT]69A454VflLg[/YT]
To Embed Videos
On Youtube Screen-
Copy the Link under the "Share" Icon (Control+c)
On MFK Screen-
Select the A/A icon on the top left of the screen
Select the Youtube Icon
Paste the Link (Control+V), select OK
Delete the following letters in Red, or anything left of the Forward Slash (/)
[YT]http://youtu.be/69A454VflLg[/YT
[YT]69A454VflLg[/YT]
To Embed Videos
On Youtube Screen-
Copy the Link under the "Share" Icon (Control+c)
On MFK Screen-
Select the A/A icon on the top left of the screen
Select the Youtube Icon
Paste the Link (Control+V), select OK
Delete the following letters in Red, or anything left of the Forward Slash (/)
[YT]http://youtu.be/69A454VflLg[/YT
i am also very curious about this? how noisy is it? does it make any water noise at all being underwater like that?
dave
