Wow.. you weren't kidding when you said you would vector this! Million thanks.. with your help this project will more forward much sooner than I planned
4000 and 3000 gallon tanks
- Thread starter vincentwugwg
- Start date
Is the inside of the viewing room going to have steel or concrete suport suport beams like the 50,000 gallon tank on here? And are the other walls of the Hexagon tank going to be clear acrylic supported with steel or concrete beams or will all of the tank be made in clear acrylic?
Here is a sample vector of a 8,617.6 U.S. gallons tank I made for a science fiction story I'm working on.
The tank in this artwork is 24 feet long by six feet tall and 8 feet wide. The tank stand is made out of steel and is covered with black wood working that hide the steel supports and the filtration system under the two foot tall stand. The creature in the tank is a female Aqua the size of a human.
This fictional tank is also based off of my dream tank.
I used the same art program Inkcape to draw out plans for a 300 gallon tank stand that I had someone build me custom made
Here is a sample vector of a 8,617.6 U.S. gallons tank I made for a science fiction story I'm working on.
The tank in this artwork is 24 feet long by six feet tall and 8 feet wide. The tank stand is made out of steel and is covered with black wood working that hide the steel supports and the filtration system under the two foot tall stand. The creature in the tank is a female Aqua the size of a human.
This fictional tank is also based off of my dream tank.
I used the same art program Inkcape to draw out plans for a 300 gallon tank stand that I had someone build me custom made
Awesome, are the metal frames to maintain structural integrity of the totes?The platinum gar tank has a ton of algae hahaha.. after it gets cleaned, the lights will go on
I have a video of the filtration before it was 70% completed..here is a link
The whole lazy river is going to be supported by a steel frame. Only the viewing room will have acrylic panels. The first diagram you posted is about 70% accurate of what I have envisioned.. except the outside walls would be hex and the interior 4 walls would be conjoined/connected via tunnel. The outside hex walls and all bottom will have steel plates painted/covered with spray on rubber or a similar product.
So only 3 walls would have viewing panels while the 4th wall would be the entrance/tunnel. Thank you for your effort
Ocean Railroader
!
Last edited:
How deep do you want your fish tank to be?
In that as if now I'm drawing the versions of the tank being ether 5 feet deep or as much as 10.
In that as if now I'm drawing the versions of the tank being ether 5 feet deep or as much as 10.
A more shallow beach area can be attached to one of the outside walls
