5 gallon sump

  • We are currently upgrading MFK. thanks! -neo
I ordered about 200 potscrubbers a while back from some website. Costed me like $35 and free shipping. Not sure of the site. I will look it up. Filled up 2 five gal buckets, and a 10 gal tote.
 
necrocanis;1154933; said:
I ordered about 200 potscrubbers a while back from some website. Costed me like $35 and free shipping. Not sure of the site. I will look it up. Filled up 2 five gal buckets, and a 10 gal tote.
Click to expand...

that would help me a lot if you can find the site, not sure if i need 200 but i have to see
 
soggysandwich;1153399; said:
here are some pics, there is tap on the over flow to hold down the check valve while the silicon is drying. and yes i know i have to cut the hose, im going to look for a check valve for that to so in case of a power failage the water doesnt start to siphon down the out take tube emptying my whole tank
Click to expand...

attachment.php


You will find that you will need to extend the vent tube higher than the top loop. Other than that, you did a nice job.
 
nycsicktank;1156214; said:
lets see the whole set up! :thumbsup:
Click to expand...
when its done
AiR foRc3 wUnZ;1156797; said:
Necro did you ever find the sight?
Click to expand...
yeah that would be helpful.

update: i bought the rest of the tubing to go to the sump. i still need the outtake tubing that goes in the tank. but i think i can set everything else up tomorrow and let it run with out media or the outtake part (just stick the tube in the tank)

question for chompers, what happens if that tube is to short?
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom