7'x12' Plywood Build For My Rays

  • We are currently upgrading MFK. thanks! -neo
I knew u were alive haha...these things take time and patience not to mention some serious change $$$. Thought of a bottom drain makes me cringe lol but there very effective. Have u thought about a drain halfway up the wall just incase of a leak?

Sent from my SAMSUNG-SGH-I747 using MonsterAquariaNetwork App

Money is not an issue. Remember I don't have a 600 gallon acrylic tank anymore.:D Instead I reinvested it into this.

The bottom drain won't be a traditional one. This will be an over the edge version. The only place for a leak will be between the tank and the sump. Almost no gap as they will be next to each other so a full drain from a leak shouldn't happen. I will show you folks this one if all goes well this weekend when I fire up a test version of it.:thumbup:
 
Looking forward to the updates :). Ill be busy with my hobby today to. I get my plastic from smooth on today , Gonna buy a bunch of 4 in PVC pipe and elbows , 45's ect and coat with plastic and re layer the plastic with purple ect. Make it look like live rock

I'm very excited to get off work
 
Just found johng thread. His tank is really similar to yours.

I've made some PDFs so I can view them later as reference material


Sent from my iPhone using MonsterAquariaNetwork app

Originally I was going to lift the tank a little higher off the floor to use standard bottom drains found in a few of the larger tanks on here and larger ponds. Not wanting to risk any fish if there was a failure on that type of bottom drain I am going a different route with the bottom drains. This has allowed me to keep the tank build very similar to how JohnG built his. Another reason I have also not gone any further is because I am contemplating going a little higher.:D

That's roughly a 1,850 gallon tank, no? How much does it cost to heat those two 1k watt heaters for a month?

1400-1500 gallons based off the inside dimensions. I quit paying attention to electrical costs. I will say this my garage is fully insulated, dry walled and heated allowing me to use only 1 watt of heat per gallon to maintain temps in any of the tanks I put out there. I didn't turn tank heaters on till a few weeks ago. Remember I live outside of Chicago Illinois.:eek: Come summer time zero heaters are used. Instead it is a 24/7 cold water drip that helps keep the tank temperatures where they need to be.
 
Originally I was going to lift the tank a little higher off the floor to use standard bottom drains found in a few of the larger tanks on here and larger ponds. Not wanting to risk any fish if there was a failure on that type of bottom drain I am going a different route with the bottom drains. This has allowed me to keep the tank build very similar to how JohnG built his. Another reason I have also not gone any further is because I am contemplating going a little higher.:D



1400-1500 gallons based off the inside dimensions. I quit paying attention to electrical costs. I will say this my garage is fully insulated, dry walled and heated allowing me to use only 1 watt of heat per gallon to maintain temps in any of the tanks I put out there. I didn't turn tank heaters on till a few weeks ago. Remember I live outside of Chicago Illinois.:eek: Come summer time zero heaters are used. Instead it is a 24/7 cold water drip that helps keep the tank temperatures where they need to be.

Interesting...Looks pretty cool. I do have to ask, what was your wife reaction when you told her you were going to build such a large tank?
 
That was simple. The only question she asked was will she still be able to park her car in the garage.

Sounds like a lucky man...I told my wife a couple weeks ago I wanted to build a 30"x60" plywood tank, she told me that we needed to buy a house first.

I'll probably end up building one anyways, but that's a next year's project. Where did you buy your glass from?
 
MonsterFishKeepers.com