acrylic or polyurethane pond sealant for plywood tank?
- Thread starter krisRTC
- Start date
my tank has 4 large viewing windows in it maybe a bit tricky with the pond liner,
plus i have very cheap acrylic through my contacts just need to sort the base!
plus i have very cheap acrylic through my contacts just need to sort the base!
not being rude but my mrs wouldnt want that in her front room id be shot if that turned up, i will post a pic now and it will explain, thanks for the help tho, i will be ordering epoxy pond paint tonight and hopefully the acrylic in by sunday night!
Its only ugly looking because its in my bedroom, no need to look nice
With ur paint and acrylic, paint a boarder on the acrylic where the adhesive will go. Or you can just scuff up the boarder and throw on some 3m 5200 marine adhesive (what I used). On the tube it says PERMANENT so it AINT comming off.
With ur paint and acrylic, paint a boarder on the acrylic where the adhesive will go. Or you can just scuff up the boarder and throw on some 3m 5200 marine adhesive (what I used). On the tube it says PERMANENT so it AINT comming off.
mitred corner top rail
full tank shot
mitred corner posts at bottom
'L' shaped rebated section for acrylic panels
base
the timber used is
corner posts 5x5" CLS
base structure4x3"CLS
top rail 6x3
acrylic panel frame 4x3
25mm plywood base panel
lots of screws
does it look anygood?
corner posts 5x5" CLS
base structure4x3"CLS
top rail 6x3
acrylic panel frame 4x3
25mm plywood base panel
lots of screws
does it look anygood?
