Africanman hooked it up!!
- Thread starter NewFish
- Start date
Thanks for the nice comment! I Love these new polys.
I had to remove the endli endli from the rest of my polys this morning. He's the bigest one and he like to bite all the other polys...on the head! So he in a 10g for now till I finish my 250g. Then that would be plenty of room for them to swim around in and not run into each other too much. Now i have to hurry up and finish buffing out the 250g.
I had to remove the endli endli from the rest of my polys this morning. He's the bigest one and he like to bite all the other polys...on the head! So he in a 10g for now till I finish my 250g. Then that would be plenty of room for them to swim around in and not run into each other too much. Now i have to hurry up and finish buffing out the 250g.
NewFish;1924748; said:
err how big is that endli? Toyin usually has good sized specimens so unless you are talking days until completion I would go get a used 55 or 40 breeder. Make sure you have a very secure top on the 10 gallon as I would suspect the endli is going to be looking for the door real soon.
tezr;1924910; said:
Well the endli is about 7-8 inches. All my other polys is about 4-5 inches. I don't want to spend any more money on another tank. I say about another month or so i'll have the 250g setup. If the endli does need to be moved, do you think its ok to put in in my chiclid tank?
I would do something if it were me. What size cichlid tank and what is in it? At least make sure you have a very tight fitting lid and then put something heavy on it as they will try to escape and are surprisingly strong jumpers...NewFish;1925300; said:
If you can find a used tank you could probably sell it for what yo have in it when you finish the 250. Used tanks seem to be in abundance right now...
