Anybody know of a good deal on dechlorinator? Maybe gallon size?
Any good deal on dechlorinator?
- Thread starter Bret Signorelli
- Start date
I've used the liquid form for years but if you want the best deal forget the liquid dechlorinator and opt for Seachem "safe" instead, the powdered variety. It'll literally last you a lifetime.
I'm just running my liquid down now until it runs out, and switching over to safe in the next few weeks.
I'm just running my liquid down now until it runs out, and switching over to safe in the next few weeks.
I have used Sodium Thiosulfate salts (crystals), and would mix my own
I have seen a 10 lb bucket for about $50 on Amazon, which should last qute a long time.
I have seen a 10 lb bucket for about $50 on Amazon, which should last qute a long time.
I've personally stop using liquid dechlorinator for a few years now. I use Seachem Safe definitely will save you money and last longer than Seachem Prime.
Thanks I just placed an order on Amazon , seachem safe 1 kilo treats 240000 gallons for $40
As others have mentioned Seachem Safe is the way to go. I was using a liter bottle of Prime every month. Then I learned about Safe and made the change. I was changing water every three days on three 125gal tanks. With Safe it was just, if I remember correctly 3/16th of a teaspoon per tank per change. So the $25 dollar bottle of Safe would last me five plus years for the same cost almost the same cost as one liter of Prime.
Keep in mind that when using these products, how much one needs will be based on one’s disinfection residual at their tap, and also on whether chloramine, or chlorine is being used to treat that water. More info below.
Approx 3 yrs ago Seachem decided that due to customers not being able to add 1+1 and divide by 2, they would simplify their dosage instructions on Seachem Safe. This topic was brought up bypops , to which I added my 2 cents. https://www.monsterfishkeepers.com/forums/threads/seachem-safe.651005/
If you read that thread, and the links that I posted in that discussion, you'll understand why I didn't agree of the change, and still don't today. Yesterday while attempting to help someone with a chlorine/chloramine situation I see that Seachem has done the same with Prime. I'm at a loss here, has the general public become so lazy and useless that they can't do a bit of research and calculation on their own? Does nobody see an issue here, but me? Seachem is telling you what you should treat your water with, without knowing anything about your local tap water. To me that seems ludicrous.
Seachem Prime instructions circa 2004
DIRECTIONS: Use 1 capful (5 mL) for each 200 L (50 gallons*) of new water. For smaller doses, please note each cap thread is approx. 1 mL). This dose removes approximately 0.6 mg/L ammonia, 3 mg/L chloramine, or 4 mg/L chlorine. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
Seachem Safe instructions circa 2004
Chlorine: use 5 g (1 tsp.*) to each 1625 L (450 gallons*) of tap water (removes 4 ppm).
Chloramine: use 5 g (1 tsp.*) to each 1250 L (300 gallons*) of tap water (removes 4 ppm).
Ammonia: use 5 g (1 tsp.*) to each 400 L (100 gallons*) of tap water (removes 4 ppm). Do not overdose!
Seemed simple enough to me, and I'm not big on math. First one has to find out if they have chlorine or chloramine as a disinfectant, then find out what the max residual is (posted on annual water reports, many are posted online) and then treat accordingly. Better yet, buy a chlorine test kit and test at your taps, and then treat accordingly. If you have chloramine, buy a Seachem ammonia alert sensor to check for free ammonia (NH3) residual. https://www.seachem.com/ammonia-alert.php
This becomes critical for those that have chloramine treated tap water, and have high pH values out of their tap, as the higher the pH, the more toxic free ammonia becomes.
But I guess that was too difficult for the masses to figure out, so now the most important thing in this hobby (water quality) is left to a by guess or by golly set of instructions.
Seachem Prime instructions circa 2019
https://seachem.zendesk.com/hc/en-us/articles/115000125454-Info-Prime-dosing-instructions
Use 1 capful (5 mL) for each 200 L (50 US gallons) of new water. For smaller volumes, please note each cap thread is approximately 1 mL. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
So I guess Seachem doesn't want to answer any more mathematical equations, or explain how to add 1+1 and divide by 2, so instead of the old ...…. This dose removes approximately 0.6 mg/L ammonia, 3 mg/L chloramine, or 4 mg/L chlorine, it's now become a one size fits all scenario, and if that doesn't work out then by all means double down. If this wasn't such a sad reflection on where todays world is at, I'd laugh. Consumers can figure out how to download & use a Seachem app, but to borrow a line from my dear old dad, they can't find their own ass from a hole in the ground.
I'm going to guess that the vast majority that read this thread, have no idea what their current disinfectant being used is (chlorine or chloramine) or what the ppm residual is at their taps. For those that do, well done!