So I've settled on a 100" long aquarium x 30" high x 12"w. Made out of plywood. Based on my figuring just the weight of the tank + water would be around 3000lbs ( feel free to correct me if i'm wrong).
Anyways while looking for a how to guide for wood I remembered doing my outdoor kitchen in steel studs covered in hardibacker. Its a whole lot easier and way stronger so was just curious if anyone has done it. I'm going to try to make the stand next week but how many opening/ drawers etc would I need for a saltwater setup not sure how to calculate. I'll be doing the stand 4 feet high as well. 24" high shelf down the middle more than likely as well.
Anyways while looking for a how to guide for wood I remembered doing my outdoor kitchen in steel studs covered in hardibacker. Its a whole lot easier and way stronger so was just curious if anyone has done it. I'm going to try to make the stand next week but how many opening/ drawers etc would I need for a saltwater setup not sure how to calculate. I'll be doing the stand 4 feet high as well. 24" high shelf down the middle more than likely as well.