Aquariums not on the level

[koltsixx]

Eh, I'm thinking it's fine nothings perfect right. Personally all my tanks were a little off. I mean homes settle, floors warp stuff happens so why bother unless it's wobbling in that case I'd be worried.

 

[kmill]

I would just leave it. Tanks are typically manufactured to be OK with it being off just a tad. I don't recommend foam for any leveling purpose.

That is what I'm thinking, it looks like the stand is (sitting) square on all four sides. Tomorrow I'm calling aqueon to get their two cents (but I know what they will say....we don't recommend anything that is not sitting on a licensed stand). Thanks for your input Bobby

If its not full yet, level it. Its not worth it not to. There could be unseen strain on the tank due to only three corners of the stand touching. Make sure the stand is on a level surface all around. That is a lot of water and weight and gravity has yet to fail.

Yea The stand was level when I built it and I know it is sitting square on the floor. I have two problems that could cause this I had to cut the stand in half to fit it down the stairs but I don't think so, or the concrete floor was not poured level more likely since I know of other place, the floor seems level with the level against it. Thanks for the input, I might have to get my husky son-in-law and his brother to help man handle this monster!!