tcarswell;3767663; said:Comes down to budgetLet us know.
Hanson;3767566; said:I need a suggestion on a filter for my 40g tank. Im still kinda confused on the whole filter, I know its purpose, im jst confused on the different types ( Power, Canister, Wet/Dry)
Need help...
BadOleRoss;3774961; said:A canister filter is just that, a canister. There will be a container, in most cases it's shaped like a cylinder or rectangle that containes filter media. A pump that is part of the canister assembly pumps water through it and back into your tank. A wet/dry filteralso referred to as a sump is a smaller tank that is usually stored under the main tank. Water flows from the main tank into the sump by means of an overflow or siphon where it will pass over/through various filter medias and then be pumped back into your tank. I good simple filter for a 40G IMO would be a HOT Magnum that will run you about $50 online. It is a smaller sized canister that hangs right on the side/back of that tank.
turtlesrock;3778814; said:ok, well your going to need about a 10x turnover rate so buy a Hang On Back filter. get one that pumps around 400-500gph (gallons per hour). dont get a canister, they are expensive and (in my opinion) work just as well as a HOB. i would suggest getting a EMPEROR 400 found in this link http://www.petco.com/product/5541/Marineland-Emperor-Filter-Systems.aspx
or a Marineland Penguin BIO-Wheel Power Filters, the one that pumps 350pgh
http://www.petco.com/product/2402/Marineland-Penguin-BIO-Wheel-Power-Filters.aspx
or 2 PETCO Power Filters, 2 of the ones that pump 270gphhttp://www.petco.com/product/106992/PETCO-Power-Filters.aspx