mike huntley;4153016; said:its the case of, do some work/spend some money on the kitchen now, then order the glass, but it's coming.
Filter still at same level as last night
just out of interest, i used 'west systems' epoxy to do the clear coats, pretty good stuff all round, but it does carry at serious health warning, apart from that its cured great
You know it's good stuff if you can get extremely high off of it
MRS SATAN;4153106; said:im impressed
................inuendo with held as it's a family site.
Some pics as i've not done much recently. Old one of a rather damp towel from when i realised the expansion problem
And a slightly different angle:
Got mrs satan to climb in for me earlier, got filter box up in the corner and the 48 bricks out that were holding it up before (didn't look that many through the glass.) As can be seen, the water level is still half way up the glass as it has been for the last few weeks and i have a towel stuck in the bottom of each window frame but i've had no leak problems since the left one started briefly so i've stopped draining any lower until i have liner ready to patch over the windows.
Will be getting some pipe for the filter outlets so it's piped straight down to the water rather than just flowing like it is for now. It's splashing a lot as it is and is very noisy
