Cleaning hose setups

[Niki_up]

Hope this is t too late, I forgot to post pictures

Here’s my setup

 

[TaxBaby16]

Usually the faucet head has a ring at the back that unscrews to allow the faucet head to be removed. Once it is off the python should fitView attachment 1417187View attachment 1417188

Nope, I tried that too and it just wouldnt fit the adaptor

 

[TaxBaby16]

I made my connections under the sink into a mix Valve...

Trying to tag old thread I made...

Amazon water temp valve $30

Time saver , $75 total...

www.monsterfishkeepers.com

THis idea is really only good for filling though....

 

[dr exum]

THis idea is really only good for filling though....

use one hose to fill other to drain into bathtub.

 

[TaxBaby16]

use one hose to fill other to drain into bathtub.

How do you do that without having the tap water to create the vacuum? thats how the python works

 

[dr exum]

How do you do that without having the tap water to create the vacuum? thats how the python works

just create syphon, tank is 3’-5’ above drain.

fill python with water from tank, out the other end in the lower tub drain, and let it flow.

the higher your tank is in relation to your drain the easier it is.

after I get siphon I retain it by closing valves on gravel vac side - keeping it full of water then moving to next tank .

saves water too by not running sink.

 

[DN328]

T TaxBaby16 , for my kitchen faucet I remove the aerator. I connect a male adaptor in the python metal adaptor. This will allow the green spout to connect to your faucet.

As mentioned before take a picture of your aerator it might work for you too.