Crenicichla cf. saxatilis ‘Inirida’ in a 75 gallon?

KATALEKEEPER

Dovii
MFK Member
Nov 18, 2020
784
694
105
Brooklyn, Ny
Hi all. Could I do a Inirida pike in a 75? I was thinking just one and maybe a pair of some smaller pleco's. Trying to keep the stocking down. I heard they get to 8" is that true? this would be my first pike. Just spitballing!
 

kno4te

MFK Moderator
Staff member
Global Moderator
MFK Member
Dec 24, 2005
18,486
20,970
480
USA
75g should work with just one pleco.
 
  • Like
Reactions: KATALEKEEPER

Rocksor

Blue Tier VIP
MFK Member
Nov 28, 2011
6,129
6,672
423
San Diego
A saxatilis type would be fine in a 75g. I would research which type of water it generally comes from, like clearwater vs blackwater. Also, pikes like a lot of flow when they are awake, like a wave maker at 1000 gph, forcing them to swim up stream for hours a day. The plecos would be fine with it to.
 

duanes

MFK Moderators
Staff member
Moderator
MFK Member
Jun 7, 2007
21,049
26,412
2,910
Isla Taboga Panama via Milwaukee
This Crenicichla would work in a 75, if you have soft, low pH water. (pH in Rio Inirida is sometimes as low as 4).
For this species, I would also add tannins, either in the form of soaking leaf litter in rain water, to use for in water changes, or
adding bags of peat moss in the flow) of filters to tint water brown.
If you have hard, mineral rich water, with pH above 7, a pike choice from a different area in S America might be a better option.
The C saxitillis from Uruguay are adapted to harder, more mineral rich water parameters.
Below some saxatillis from Uruguay I had, that did well in water with pH 7.8, 250ppm total hardness.
1612447618553.png
 

KATALEKEEPER

Dovii
MFK Member
Nov 18, 2020
784
694
105
Brooklyn, Ny
This Crenicichla would work in a 75, if you have soft, low pH water. (pH in Rio Inirida is sometimes as low as 4).
For this species, I would also add tannins, either in the form of soaking leaf litter in rain water, to use for in water changes, or
adding bags of peat moss in the flow) of filters to tint water brown.
If you have hard, mineral rich water, with pH above 7, a pike choice from a different area in S America might be a better option.
The C saxitillis from Uruguay are adapted to harder, more mineral rich water parameters.
Below some saxatillis from Uruguay I had, that did well in water with pH 7.8, 250ppm total hardness.
View attachment 1450043
mine is at 7.2. Maybe the Uruguayans are better.
 

duanes

MFK Moderators
Staff member
Moderator
MFK Member
Jun 7, 2007
21,049
26,412
2,910
Isla Taboga Panama via Milwaukee
mine is at 7.2. Maybe the Uruguayans are better.
What about total hardness, and conductivity of your tap water?
These values can usually be found on the water quality section of your city's web site.
Sometimes pH can be neutral like yours, but the water is soft and mineral free.
Below, some collection point data from northern S America
F4743C82-2314-439D-89DC-B243A12BE111_1_201_a.jpeg
This is an example (above), where pH is neutral, but the hardness and conductivity values are low.
And these can at times, be more important factors than the simple pH alone.

58D5FF9B-7535-49F4-AEAA-3FFC11DC0A2B_1_201_a.jpeg
 
  • Like
Reactions: KATALEKEEPER

KATALEKEEPER

Dovii
MFK Member
Nov 18, 2020
784
694
105
Brooklyn, Ny
What about total hardness, and conductivity of your tap water?
These values can usually be found on the water quality section of your city's web site.
Sometimes pH can be neutral like yours, but the water is soft and mineral free.
Below, some collection point data from northern S America
View attachment 1450044
This is an example (above), where pH is neutral, but the hardness and conductivity values are low.
And these can at times, be more important factors than the simple pH alone.

View attachment 1450045
will do thanks!
 

Rocksor

Blue Tier VIP
MFK Member
Nov 28, 2011
6,129
6,672
423
San Diego
What about total hardness, and conductivity of your tap water?
These values can usually be found on the water quality section of your city's web site.
Sometimes pH can be neutral like yours, but the water is soft and mineral free.
Below, some collection point data from northern S America
View attachment 1450044
This is an example (above), where pH is neutral, but the hardness and conductivity values are low.
And these can at times, be more important factors than the simple pH alone.

View attachment 1450045
What book are you pulling all this information from? Are there more river systems in the book?
 
  • Like
Reactions: Matteus

KATALEKEEPER

Dovii
MFK Member
Nov 18, 2020
784
694
105
Brooklyn, Ny
What about total hardness, and conductivity of your tap water?
These values can usually be found on the water quality section of your city's web site.
Sometimes pH can be neutral like yours, but the water is soft and mineral free.
Below, some collection point data from northern S America
View attachment 1450044
This is an example (above), where pH is neutral, but the hardness and conductivity values are low.
And these can at times, be more important factors than the simple pH alone.

View attachment 1450045
our hardness is 64ppm. our conductivity is 120 0n average.
 
zoomed.com
hikariusa.com
aqaimports.com
Store