DIY Help with python

[GrimReaperMB]

ok its not a python but it the exact same thing just a different brand.

my problem is that the drain doesn't drain fast enough, and because of this there is not enough suction to clean the bottom of the tank. basically i have just been using it to change the water really, really slowly. I have used many crazy harsh drain cleaners already but nothing. its just a really small sink in the bathroom.

what i want to know is.. is there any kind of ad on so i cold make it drain into say the toilet instead? i thought of just fitting a piece of pvc piping on to it but would could i fasten it with? think it would work? also i have about 10'-15' of slack on the hose if i cut it would that make a big difference at all? the sink is about 30' away from the tank.

Thanks,

Dan

 

[duke33]

Add any thing you have. The key is where it drains needs to be lower than the tank. The lower the more suction.

 

[midnight]

toilet!!
lift lid,clean,lay hose on toilet,close lid,add weight so it doesnt fall out "i use a bathroom scale"

scoop water in tube,lift,refill fast,lift,put in tank,should get the water going so you dont have to suck on it.

i wouldnt cut

 

[Wolf3101]

just close the lid on the hose once you have the suction started...

 

[midnight]

what?lol

 

[ercnan]

Yup, the lower you can get it relative to the tank level, the faster it will drain.

 

[midnight]

i think its the sink not the hose

 

[erider]

i put mine out the back door. i have to turn the valve off a little becous it works to well.