hahaha, I will send anyone the Blue prints if they want, it has material and measurementsJohn7429;3930539; said:
DIY INDUSTRIAL FISH STAND BUILD
- Thread starter caribemob
- Start date
caribemob;3931505; said:hahaha, I will send anyone the Blue prints if they want, it has material and measurements
I've never worked with metal... I'm sure the (full) costs involved would not make it economical for people outside of your industry...
If you have an electronic copy, I wouldn't mind having it to work with in case I do run into someone that has metal hookups...
John7429;3932479; said:I've never worked with metal... I'm sure the (full) costs involved would not make it economical for people outside of your industry...
If you have an electronic copy, I wouldn't mind having it to work with in case I do run into someone that has metal hookups...
look into used pallet racking, the stuff is dirt cheap, stronger, and easier to assemble/dissasemble than unistrut.
Thanks everybody, I have used uni-strut for years to me nothing is better, or more reliable, plus this is double strut with the steel feet bolted to concrete slab, also marine plywood, and 2x6's nailed to the studs in the wall, Trust me I can put whatever on these shelves.
it's a 265gal 7'x2'x2.5', that shelve also has room for any 4' tank and space for a 180 gal , the other shelves fit 2 6' tanks a piece for a total of 7 tanks over 6' in my fish room
