diy plywood aquarium

  • We are currently upgrading MFK. thanks! -neo
nice looking tank,, after reading this thread i would be a little nervous about the thickness
of the glass and the actual structure of the tank itself. For a DIY i think you need to brace/
support the walls of the tank better, just my 2 cents.
all in all its a nice looking build and i hope it all works out for you
 
ooks nice but it would make me nervous to put certain fish in there, fish that are glass bangers due to aggression and/or fright. Good luck
 
flukekiller said:
nice looking tank,, after reading this thread i would be a little nervous about the thickness
of the glass and the actual structure of the tank itself. For a DIY i think you need to brace/
support the walls of the tank better, just my 2 cents.
all in all its a nice looking build and i hope it all works out for you
Click to expand...

+1 you might want to add some extra braces on the corners just to be safe , although its holding water fine now once fish start thrashing about it may not last (depending on what fish you have )
Best of luck with it :)

Sent from my Nexus 7 using MonsterAquariaNetwork App
 
Evz jardini said:
+1 you might want to add some extra braces on the corners just to be safe , although its holding water fine now once fish start thrashing about it may not last (depending on what fish you have )
Best of luck with it :)

Sent from my Nexus 7 using MonsterAquariaNetwork App
Click to expand...
going to put an oscar , a black ghost knife. gourami clown loach and soon a silver arowana
 
Was going to say 10mm is very safe!

Its all about the bracing

Sometimes all the technical written stuff doesn't compare to real world stuff, its more to cover ones butt ( liability) then anything
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom