Fish Room and Indoor Pond 24' by 7' by 4'
- Thread starter AW7020
- Start date
Kevaldo;1850698; said:good to see those guy's taking a break, everything looks to be coming on well.
Yes and enjoying their little titbits too. getting hungry?
amehel0;1851003; said:
amehel0;1851004; said:
Yes funny.
Thanks.hamato_yoshii;1854741; said:
Been raining last few days and nothing much done.
and Today one of the pacu's floated up dead.
Aaarh. now only 8 left. (this is from 2" in size from Aug 2007 last year.)
Getting to be rather large by now about a foot in length. Size of the tile is 1' by 1'
basslover34;1855195; said:dang, that sucks... almost at beast size
ya sucks a little.hamato_yoshii;1855292; said:Wow, they get big quick...
big and messy eaters creates lots of splash during meal time too.
Attrition??amehel0;1858022; said:
Kevaldo;1858293; said:
One of the things about this hobby. Fish Loss etc....
lmartelli77;1858553; said:
More updates in the following post.
Well the regular rain showers are hopefully over for this week.
Work is now re-Starting on the Fish room and the exterior walls.
Some pics of the Finishing and Plastering efforts thus far.
Pic 1 Back wall plastering
Pic 2 Extension Wall being done.
Pic 3 Laying up the cement paste over the bricks
Work is now re-Starting on the Fish room and the exterior walls.
Some pics of the Finishing and Plastering efforts thus far.
Pic 1 Back wall plastering
Pic 2 Extension Wall being done.
Pic 3 Laying up the cement paste over the bricks
They will start the indoor pond wall plaster over the next few day. Will take more pic of that activities and post them at the end of this week.
Pic 1 shows the continued plaster works and also on the right side of the worker the Outdoor wiring being prepared for the outside tanks and lights.
This is a DIY effort done by myself.
Pic 2 and 3 The plaster for the indoor and filter are being done and will be finished up with a white cement mix as the final coat.
Pic 3 shows the DIY town hall water supply. This will be used for clean up and also to supply the pond fresh water.
More of that by the end of this week when the pics are taken.
Pic 1 shows the continued plaster works and also on the right side of the worker the Outdoor wiring being prepared for the outside tanks and lights.
This is a DIY effort done by myself.
Pic 2 and 3 The plaster for the indoor and filter are being done and will be finished up with a white cement mix as the final coat.
Pic 3 shows the DIY town hall water supply. This will be used for clean up and also to supply the pond fresh water.
More of that by the end of this week when the pics are taken.
