Hello all. I've decided to get back into fishkeeping and found this site. Awesome tanks out there and so many ideas to go with.
I've recently ordered a 125 gal AGA Megaflow tank. Anyone have any experience with this tank?
I also picked up the megaflow kit and was curious do I have to use those bulkheads that came with it? I'm not too crazy about the bulkheads that have a inset on one end for the hose. I'm planning to just run pvc pipes instead.
Another thing, I got a 20 gal High and was planning to turn that into a W/D. I already have the partition set up, and the capacity for the biomedia is about 7.4 gal. I'm planning to use a plastic 3 drawer to hold the filter pads, chemi-pure and various other media.
This drawer will go on top of the tank, with a bulkhead on the top..of course all 3 drawers will be drilled out in the bottom...most likely 9 rows each having 12 holes about 3/8" big.
Tank stand is already built, and plan to work on the canopy this weekend. Stand is made of 2x4's skinned with 3/4" birchwood with two cutouts for dual doors that will be using the recessed hinges.
Planning to house 2 rays, a few parrots...not completely decided on maybe just going with a jardini as the soul occupant.
Any thoughts or ideas will be appreciated.
I've recently ordered a 125 gal AGA Megaflow tank. Anyone have any experience with this tank?
I also picked up the megaflow kit and was curious do I have to use those bulkheads that came with it? I'm not too crazy about the bulkheads that have a inset on one end for the hose. I'm planning to just run pvc pipes instead.
Another thing, I got a 20 gal High and was planning to turn that into a W/D. I already have the partition set up, and the capacity for the biomedia is about 7.4 gal. I'm planning to use a plastic 3 drawer to hold the filter pads, chemi-pure and various other media.
This drawer will go on top of the tank, with a bulkhead on the top..of course all 3 drawers will be drilled out in the bottom...most likely 9 rows each having 12 holes about 3/8" big.
Tank stand is already built, and plan to work on the canopy this weekend. Stand is made of 2x4's skinned with 3/4" birchwood with two cutouts for dual doors that will be using the recessed hinges.
Planning to house 2 rays, a few parrots...not completely decided on maybe just going with a jardini as the soul occupant.
Any thoughts or ideas will be appreciated.
. Good luck with your tank though. Ever tried bichirs? Maybe you should do an odd ball tank. I love those kind.
