There are plenty of logical ways to create covers for such a tank... depending on your situation/requirements you could do it via a custom build hood, or multiple panels of glass/acrylic... your euro bracing could actually be changed to a solid top with access panels cut into it (since you have not built the tank yet)
Housing Tigrinus
- Thread starter rodger
- Start date
agreed a 6x6 tank can be easily covered especially if it isn't built yet. The 4000 gal aquarium I was building had a full cover with huge access panels on the top, and feeding ports. Too bad I didn't finish it but no way I would build a large tank without a good top.
If someone has a logical idea for one, I would consider it. Not real high on the idea, though. Plus I am building this on a fairly tight budget of cut up used 220's and plywood.
I've spent many hours reading this thread carefully and found it to be an excellent resource and one of the best documented step-by-step building instruction by MonsterPeacock: http://www.monsterfishkeepers.com/f...esign-turned-reality&highlight=monsterpeacock
... if you were looking for ideas...
... if you were looking for ideas...
