I will post pics very soon. Dimensions are 10'x2.5'x2.5'. Set up with corner over flows to a single large sump. 23"X23"X3" filter tray. Currently filled with a very fine filter pad, coarse pad on top with a carbon pad on top of that. 2 pond master return pumps.No GPH posted on the pumps. Which is one reason I want to add the power head.
I need help
- Thread starter Gary_Gilbert
- Start date
Nice dimension. I'm just about to get setup a similar 10x4x2. Wish mine was 30inches tall but can't have everything in the world. Ya the flow to the corners is hard. I was thinking if needed I have a 1k gph pump I could put on the bottom back of tank and build a spray bar to push water to the top from the bottom. My overflows are split in the middle back. Just a thought but with the over flows in corners have 2 jets from middle bottom pointed to over flows would work good. 
Sent from my DROIDX using MonsterAquariaNetwork App
Sent from my DROIDX using MonsterAquariaNetwork App
