anyone have an inline pressure regulator on their drip they like? Think I want to install one. I have pressure compensating regulators but I think the excessive pressure is rough on them.
inline pressure regulator for drip system
- Thread starter Charney
- Start date
I use this guy-
https://smile.amazon.com/gp/product/B00MVBUJZC/ref=oh_aui_detailpage_o05_s02?ie=UTF8&psc=1
It seems to do the job well. I'm not sure on the pressure straight off the line, but mine goes through the 40 psi regulator, through a sediment filter, then the pressure gauge before going through the carbon blocks. The gauge usually shows about 35 psi, so I know when it drops it is time to replace the sediment filter.
https://smile.amazon.com/gp/product/B00MVBUJZC/ref=oh_aui_detailpage_o05_s02?ie=UTF8&psc=1
It seems to do the job well. I'm not sure on the pressure straight off the line, but mine goes through the 40 psi regulator, through a sediment filter, then the pressure gauge before going through the carbon blocks. The gauge usually shows about 35 psi, so I know when it drops it is time to replace the sediment filter.
I know Jose
jcardona1
set up his with drip emitters. https://www.dripworks.com/drip-irrigation/drippers-emitters/pressure-compensatingHere's his thread: https://www.monsterfishkeepers.com/...hanges-suck-heres-my-automated-system.500155/