Ok i been looking at these kiddie pools they selling at wallmart The ones with the slide in them. I was thinking take some plexy glass warm it with a heat gun and have it pre cut to fit. And place it on the inside of the pool. But next to the slide have it folow the slide around the side of the pool and keep it level with the side of the pool. Take another peice and make a little dam at the bottom of the slide. Take and fill the enclosed area ya just made with a bunch of ac 500 sponges. or hell go to a sponge place and but a piece big enuf to cut to fit the area. Now use a couple power heads or a pond pump. And have them pump watter to the top of the slide . The watter will run over and threw the sponges makeing a filter. And use one of them debre traps they sell for fish ponds at the inlet for the pump. And stick it in my yard. Say maybe even dig a hole and sink it down or hell leave it above ground for the summer.
What do you all think of my idea. Or what about useing one of the small pool filters that have only sand inside of them for it as a secondary filter setup
What do you all think of my idea. Or what about useing one of the small pool filters that have only sand inside of them for it as a secondary filter setup
