"L" shaped tankinside corner sealing

[Tstone]

Could you rotate counter clock wise? and kinda back it up into that room to the left?

 

[anarekist]

time for a new house.

 

[Zari]

Why not seal the plywood thats used for the back of the tank and assemble it outside in the garage or wherever you were planning too. Assemble the stand in pieces there too then put it all together in the bedroom.

 

[rotccapt]

then how do i get it back out if i have to move? i know just take it apart. last thing is the wife want it to hold water for a week in the garage before it comes inside

 

[npaetsch]

What if you turn it over short side on top and put that side in first. Then rotate the short side down the hallway and them pull the hole thing into the bed room.

 

[Warrensmentor]

If this dude is smart enough to make a computer model with all the dimensions already, he probably has considered all the angles to try getting it in.

Sent from my SPH-D710 using MonsterAquariaNetwork App

 

[rotccapt]

yep tried it in all directions and it wont fit because the short side of the L is 48 inches and there is not enough room to rotate through the doorway. if the tank was not so tall it would work because it would give more wiggle room in the doorway but i am set on the 30 inch tall tank so im back to my original 36 inch wide 75 inch long and 30 inch tall tank. i will have almost the same volume (actually slightly more)