So, I am in the beginning stages of rebuilding my 1989 Chevrolet Camaro RS. Currently has a HO 350 with a holley 750 double pumper carb and edelbrock performer intake. Here is my plan for the car.
Right now:
Holley Double Pumper Carburator (750cfm)
Edelbrock Performer Intake
Stock iron heads
stock rockers/lifters/cam/ect.
...well lets just say everything else is still stock
What I am doing to it:
1.) Currently it has a set of 16"x14" Mickeys on the back, replacing the rear end with either a 4 lin suspension or doing a ladder bar rear frame to fit these big meats under the car.
2.) QFT 850cfm carb upgrade
3.) Edelbrock Super Victor Intake (3500-8000rpm)
4.) New 7qt. Moroso performance oil pan
5.) Block will be being acid dipped and bored .040"
6.) Proform Aluminum Roller Rockers
7.) Comp Cams High Energy Pushrods
8.) Comp Cam Magnum Cam kit (501" Lift, Adv. Dur. 292 degrees)
9.) Jegs Dragster style radiator
10.) Proform electric water pump
11.) Edelbrock Victor Racing Fuel Pump (130gph)
12.) NOS Cheater System (mainly for looks, and if I feel so tempted..
)
13.) HEI Distributer
14.) Forged Pistons/Rods
15.) MSD 6A Igniton
More of a list to come, this will be an on-going project, so don't think I am dropping 3k right now. I woudl also like to finish the custom cowl induction hood, and see about getting some either carbon fiber or fiberglass doors to cut down on weight. Who knows, pics will be up when it gets light out.
If you have a project like mine post it, what you have, what you would like to do with it? Anything really, muscle/import/tuner? Whatever.
Kevin
Right now:
Holley Double Pumper Carburator (750cfm)
Edelbrock Performer Intake
Stock iron heads
stock rockers/lifters/cam/ect.
...well lets just say everything else is still stock
What I am doing to it:
1.) Currently it has a set of 16"x14" Mickeys on the back, replacing the rear end with either a 4 lin suspension or doing a ladder bar rear frame to fit these big meats under the car.
2.) QFT 850cfm carb upgrade
3.) Edelbrock Super Victor Intake (3500-8000rpm)
4.) New 7qt. Moroso performance oil pan
5.) Block will be being acid dipped and bored .040"
6.) Proform Aluminum Roller Rockers
7.) Comp Cams High Energy Pushrods
8.) Comp Cam Magnum Cam kit (501" Lift, Adv. Dur. 292 degrees)
9.) Jegs Dragster style radiator
10.) Proform electric water pump
11.) Edelbrock Victor Racing Fuel Pump (130gph)
12.) NOS Cheater System (mainly for looks, and if I feel so tempted..
)13.) HEI Distributer
14.) Forged Pistons/Rods
15.) MSD 6A Igniton
More of a list to come, this will be an on-going project, so don't think I am dropping 3k right now. I woudl also like to finish the custom cowl induction hood, and see about getting some either carbon fiber or fiberglass doors to cut down on weight. Who knows, pics will be up when it gets light out.
If you have a project like mine post it, what you have, what you would like to do with it? Anything really, muscle/import/tuner? Whatever.
Kevin
