~ Need Sump Drilled ~ Battle Ground ~ PU

[Modest_Man]

If you're worried about bowing clamp a piece of plywood along behind (or in front and and drill through the wood first) where you're drilling.

If you crack it, drill out the end of the crack with a drill bit so it won't spread and use a piece of scrap acrylic and Weldon to strengthen the area.

If you really want some help I could make it up there sometime for moral support and bring some scrap pieces and some Weldon "just in case".

 

[Carpsalmon]

You've seen this tank (the 330 gallon). Would you drill it if it were yours based on other tanks you've done?

I would drill it. Use a dimond drill bit they go much slower and are less aggressive. I actually used a wood door hole saw bit before. You'll be fine.


Sent from my iPhone using MonsterAquariaNetwork app

 

[Pharaoh]

I would drill it. Use a dimond drill bit they go much slower and are less aggressive. I actually used a wood door hole saw bit before. You'll be fine.


Sent from my iPhone using MonsterAquariaNetwork app

No need for a diamond bit on acrylic. Wood bit will be fine.

 

[Devzev]

U drill it like u would through wood. I used a spade bit. I used Irwin speedbor spade drill bits



Sent from my iPhone using MonsterAquariaNetwork app

 

[Apexden]

ill do it for you justin lol

 

[CrimsonFog]

Did you drill it?